Whirlpool WFW9351YW 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool WFW9351YW에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WFW9351YW 48 페이지. Clothes washer
Whirlpool WFW9351YW에 대해서도 마찬가지입니다: 에너지 매뉴얼 (2 페이지)

페이지 인쇄

Press POWER to turn on washer

Slowly close the dispenser drawer. Make sure the drawer is

closed completely, then press and hold POWER to turn on

the washer. To cancel a cycle press POWER, then the washer

powers down, the door unlocks, and clothes can be removed.

Select CYCLE

Model WFW9351** shown

Turn cycle knob to select your wash cycle. See "Cycle Guide"

for details on cycle features. Not all options and settings are

available on all cycles.

Adjust cycle settings, if desired

Model WFW9351** shown

The display will show the default settings for the selected

cycle. If desired, press the button beneath each setting to

adjust the Temperature, Spin Speed, and Soil Level. Tightly

packing, unbalanced loads, or excessive suds may also

cause the washer to increase the cycle time.

NOTE: Not all settings are available on all cycles. See "Cycle

Guide" for available settings.

Select additional options, if desired

(on some models)

Model WFW9351** shown

To add additional options to the cycle, press the button

for the desired option until light glows to add them to the

selected cycle.

NOTE: Not all options are available with all cycles.

See "Cycle Guide" for available options.

Delay Start

If you do not want to begin a cycle immediately, you may

choose the Delay Start option. This will delay the start

of the wash cycle by up to 10 hours.

To set Delay Start:

1. Press DELAY START until the desired delay time (in hours)

is illuminated.

2. Press START/PAUSE. The countdown to the wash cycle

will show in the display window.

10.

Press and hold START/PAUSE

to begin wash cycle

Press and hold the START/PAUSE button to start the wash

cycle. To pause a cycle in progress, press the START/PAUSE

button once, then press and hold again to continue the cycle.

To cancel a cycle, press the POWER button.

Door Locked

Once you press and hold START/PAUSE, you will hear

the door lock, unlock, and lock again. When the door locked

light illuminates, the door is locked. The door is locked

and unlocked automatically, depending on the stage of

the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2 missed garments,

you may do so while the "Add a Garment" light is lit.

Press START/PAUSE once; the door will unlock once the

washer movement has stopped. This may take several

minutes. Then close door and press START/PAUSE again

to continue the cycle.

To add garments after the "Add a Garment" period is over, the

wash cycle needs to be canceled, the items added, and a new

wash cycle started.