Whirlpool 120-volt 60-Hz Washer 설치 지침
{카테고리_이름} Whirlpool 120-volt 60-Hz Washer에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 120-volt 60-Hz Washer 5 페이지. 120-volt 60-hz
Installation Instructions
IMPORTANT:
Read and save these
instructions.
IMPORTANT:
Installer: Leave Installation Instructions with the homeowner.
Homeowner: Keep Installation Instructions for future reference.
Save Installation Instructions for local electrical inspector's use.
120-volt
60-Hz
Washer
Part No. 3952817 Rev. B
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on
your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either the word
"DANGER" or "WARNING". These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions
are not followed.
Parts supplied:
Open lid and remove parts from
inside washer. Check that all parts
were included.
2 inlet hoses
1 drain
hose
Tools needed:
pliers
scissors
You can be killed or seriously injured if
you don't immediately follow instructions.
You can be killed or seriously injured if
you don't follow instructions.
4 flat water
hose washers
yellow clamp
drain hose clamp
2 front leveling legs
literature package
(inside washer)
with nuts
utility
level
knife
adjustable wrench or
9/16" open-end
wrench