Whirlpool 3360461 사용 및 관리 매뉴얼 - 페이지 6
{카테고리_이름} Whirlpool 3360461에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3360461 28 페이지. Two speed washers
페이지 인쇄
l
If your machine
has a slide Load Size Selec-
tor, you may set the load size anywhere
on or
between
the small and ex large settings.
To change the load size setting after the washer
has started to fill, move the Selector to the
desired new setting.
NOTE: If your washer has RESET on the Load
Size Selector,
change the load size selection
by
first moving the Selector to RESET, then to the
new load size.
Load size tips
l
Items should move freely in the washer.
Do
not overload
the machine or select a load size
that is too small for the wash load.
l
Use a large load size setting for best results
with permanent
press clothes.
l
Reduce wash time when using a small load
size setting. Loads with only a few small items
need less wash time.
Selecting
wash-rinse
temperatures
Your washer has a knob, CLEAN TOUCH*
or
push button Water Temperature
Selector.
Match
the water temperature
to the type of fabric and
soils being washed.
The top temperature
is the
wash water and the bottom temperature
is the
rinse water.
Water
temperature
tips
l
Use warm wash water with the Permanent
Press, Knits Gentle and Woollens
cycles.
l
Always use cold rinse water for permanent
press fabrics.
l
For heavily soiled permanent
press or knit
clothes, prewash
or presoak
before washing
in
warm water.
See the "Water usage guide" on page 18 for
more information.
Knob selector
Push button selector
CLEAN TOUCH selector-
an indicator
appears
above the water
temperatures
selected
Selecting
a cycle
and time
You will find information
you need to help you
make correct cycle selections
in this section.
l
Pages 7-9: Use the information
on these
pages to guide you when selecting
a wash
cycle and time.
l
Page 10: Use this page to help you under-
stand what happens
during a wash cycle.
J
Cycles may vary with model