Whirlpool 3DWTW4740 사용 및 관리 매뉴얼 - 페이지 14

{카테고리_이름} Whirlpool 3DWTW4740에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3DWTW4740 28 페이지. Top-loading
Whirlpool 3DWTW4740에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

TROUBLESHOOTING

if you experience

First try the solutions suggested here to possibly avoid the cost of a service call.

Possible Causes

Solution

Not cleaning or

Using too much detergent.

The suds from too much detergent can keep washer from

removing stains (cont.)

operating correctly. Always measure detergent and follow

manufacturer's

directions based on load size and soil level.

Not using correct cycle for fabric type.

Use a higher soil level cycle option and warmer wash

temperature to improve cleaning.

Not using dispensers.

Not washing like colors together.

Use Heavy cycle for tough cleaning. See the "Cycle Guide" to

match your load with the best cycle.

Use dispensers to avoid chlorine bleach and fabric softener

staining.

Load dispensers before starting a cycle. Select Fabric Softener

Added-Yes (on some models) when using fabric softener.

Do not add products directly onto load.

Wash like colors together and remove promptly after the cycle

is complete to avoid dye transfer.

Incorrect dispenser

Clogged dispenser.

Use only liquid chlorine bleach in the bleach dispenser. Use only

operation

fabric softener in the fabric softener dispenser.

Fabric damage

Sharp items were in pockets during

Empty pockets, zip zippers, and snap or hook fasteners before

wash cycle,

washing to avoid snags and tears.

Tie all strings and straps before starting wash load.

Mend rips and broken threads in seams before washing.

Strings and straps could have tangled.

Items may have been damaged before

washing.

Fabric damage can occur if load is

tightly packed.

Liquid chlorine bleach may have been

added incorrectly.

Garment care instructions

may not

have been followed.

Odors

Clean Washer maintenance not done

as recommended.

Using too much detergent.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 garments after washer is started.

Do not pour liquid chlorine bleach directly onto load. Wipe up

bleach spills.

Undiluted bleach will damage fabrics. Do not use more than

recommended

by manufacturer.

Do not place load items on top of bleach dispenser when

loading and unloading washer.

Always read and follow garment manufacturer's

care label

instructions.

See the "Cycle Guide" to match your load with the

best cycle.

See "Washer Care" in Washer Maintenance.

Unload washer as soon as cycle is complete.

Be sure to measure correctly. Always follow the manufacturer's

directions.

See "Washer Care" section.

Lid locked light is

The lid is not closed.

Close the lid. The washer will not start or fill with the lid open.

flashing

A cycle was stopped or paused

The washer may still be spinning. The lid will not unlock until the

using the Start/Pause/Unlock

button,

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics,

Before calling for assistance or service, please check "Troubleshooting".

It may save you the cost of a service call. If you still need

help, contact the dealer from whom you purchased the washer or an authorized service company. When calling, please know the

purchase date and the complete model and serial number of your washer. The information will help us to better respond to your

request.