Whirlpool 3DWTW4840 사용 및 관리 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool 3DWTW4840에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3DWTW4840 28 페이지. Top-loading
Whirlpool 3DWTW4840에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Select LOAD SIZE

Model 3DWTW4840 shown

Select the load size setting most suitable for your load. Small

will add a low amount of water for smaller loads and Super will

add the most amount of water for large or bulky loads. Items

need to move freely.

Select TEMPERATURE

Model 3DWTW4840 shown

Once you select a cycle, select the desired wash temperature

by turning the Temperature knob to the appropriate setting

based on your load. All rinses are tap cold.

NOTE: Always read and follow fabric care label instructions

to avoid damage to your garments.

Wash Temp

Hot

Some cold water is added to save

energy. This will be cooler than

your hot water heater setting.

Warm

Some cold water will be added, so

this will be cooler than what your

previous washer provided.

Cool

Warm water may be added to

assist in soil removal and to help

dissolve detergents.

Cold

This is the temperature from your

faucet. If your tap cold water is

very cold, warm water may be

added to assist in soil removal and

help dissolve detergent.

Suggested Fabrics

Whites and pastels

Durable garments

Heavy soils

Bright colors

Moderate to light soils

Colors that bleed

or fade

Light soils

Dark colors that

bleed or fade

Light soils

Select options, if desired

(on some models)

Model 3DWTW4840 shown

Select the desired cycle options. If you are using fabric

softener, be sure to select one of the Fabric Softener Added-

Yes options.

10.

Press START/Pause/Unlock

to begin wash cycle

Press the START/Pause/Unlock button to start the wash

cycle. When the cycle has finished, the DONE indicator will

light. Promptly remove garments after cycle has completed

to avoid odor, reduce wrinkling, and rusting of metal hooks,

zippers, and snaps.

IMPORTANT: After the washer basket fills to the selected

water level, the lid must be closed before the wash cycle

can start. If filling stops with the lid open, close the lid and

press START button.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/Pause/Unlock; the lid will unlock once the

washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Then close

lid and press START/Pause/Unlock again to restart the cycle.

If lid is left open for more than 10 minutes, the water will

pump out automatically.