Whirlpool 3RLSQ8000JQ6 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Whirlpool 3RLSQ8000JQ6에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3RLSQ8000JQ6 12 페이지. Easy-to-use automatic washer
Whirlpool 3RLSQ8000JQ6에 대해서도 마찬가지입니다: 부품 목록 (14 페이지)

페이지 인쇄

6. Select a wash temperature with the WASH TEMPERATURE

selector. The selections are color-coordinated with the cycles

on the Cycle Control knob so you can select a water

temperature that matches the type of fabric and soils being

washed. Follow garment label instructions.

Your washer uses automatic temperature control (on some

models) to maintain a uniform water temperature by

regulating the incoming hot and cold water. This helps

eliminate undissolved detergent and ensures consistent

cleaning results. The Hot and Warm settings on this washer

will be cooler than you are accustomed to. Wash

temperatures in this washer are lower than the temperatures

you may be used to in conventional washers.

NOTE: Make sure that both the hot and cold water taps are

fully turned on, or the automatic temperature control feature

will not work properly.

Water Temp

Use For

Hot

Whites and pastels

Heavy soils

Warm

Bright colors

Moderate to light soils

Cold

Colors that bleed or fade

Light soils

NOTE: In wash water temperatures colder than 60ºF

(15.6ºC), detergents do not dissolve well. Soils can be difficult

to remove. Some fabrics can retain wear wrinkles and have

increased pilling (the formation of small lint-like balls on the

surface of garments).

7. (OPTIONAL) For an additional rinse and spin at the end of a

wash cycle, set the EXTRA RINSE selector to ON.

8. Push in the Cycle Control knob and turn it clockwise to the

wash cycle you want. Reduce the wash time when using a

small load size setting. See "Selecting a Cycle, Time, and

Temperature."

Pull out the Cycle Control knob to start the washer.

To stop or restart your washer

To stop the washer at any time, push in the Cycle Control

knob.

To restart the washer, close the lid (if open) and pull out

the Cycle Control knob.

Selecting a Cycle, Time,

and Temperature

This section describes the available wash cycles and

temperatures, and will help you make the best cycle selections

for your wash loads. Each cycle is designed for different types of

fabric and soil levels.

The labels next to the selections on the WASH TEMPERATURE

selector are recommended wash cycles, load colors, and types

of loads to use with each temperature. To use your washer,

simply choose the cycle on the Cycle Control knob that

corresponds with the one you chose on the WASH

TEMPERATURE selector. The selections are color-coordinated to

make washing easier.

The washer pauses briefly throughout each cycle. These

pauses are normal. Refer to "Normal Sounds" to learn more

about the sounds you may hear during a wash cycle.

Refer to "Understanding Washer Cycles" to learn what

happens during a wash cycle.

Cycle Control knob

Wash Temperature

Cotton cycle

The Cotton cycle features high-speed agitation followed by a

brief period of low-speed agitation for cleaning cottons and

linens. High spin speeds shorten drying times. Select 6 or

9 minutes of wash time, depending on whether your load is

moderately or heavily soiled.

Super Wash/Heavy cycle

Select the 15-minute Super Wash/Heavy cycle to wash heavily

soiled loads that need maximum soil removal. Use two times the

amount of recommended detergent for this cycle.

Synthetics/Permanent Press cycle

The Synthetics/Permanent Press cycle starts with high-speed

agitation and then steps to low-speed agitation for cleaning

permanent press blends and synthetic fabrics. To minimize

wrinkling, this cycle features a cool-down rinse and a low-speed

final spin. Select 6 or 9 minutes of wash time to clean lightly to

moderately soiled loads.