Whirlpool 3RLSQ8033 사용 및 관리 매뉴얼 - 페이지 6

{카테고리_이름} Whirlpool 3RLSQ8033에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3RLSQ8033 12 페이지. Easy-to-use automatic washers

페이지 인쇄

WARNING

Fire Hazard

Never place items in the washer that are dampened

with petrol or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electric Shock Hazard

Electrically earth this appliance.

Do not use an extension cord or an electrical portable

outlet device.

Failure to follow these instructions can result in death,

fire or electric shock.

1. Measure detergent and pour it into the washer. If desired, add

powder or liquid color safe bleach. Add extra detergent for the

Super Wash/Heavy cycle.

Drop a sorted load of clothes loosely into your washer.

Load evenly to maintain washer balance. Mix large and

small items.

Items should move easily through the wash water.

Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some

synthetic knits, select a "large" water level to provide more

space (see Step 5).

Starting Your Washer

2. (OPTIONAL) Pour measured liquid chlorine bleach into the

liquid chlorine bleach dispenser. Bleach will be diluted

automatically during the wash part of the cycle.

Do not use more than 250 ml (1 cup) for a full load. Use

less with a smaller load size.

Follow the manufacturer's directions for proper use.

To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer

basket.

Use only liquid chlorine bleach in this dispenser.

3. (OPTIONAL) Pour measured liquid fabric softener into the

liquid fabric softener dispenser. Softener is added

automatically during the rinse portion of the cycle.

Dilute liquid fabric softener by filling the dispenser with warm

water until liquid reaches the crossbar in the opening.

Do not spill or drip any fabric softener on the clothes.

Use only liquid fabric softener in this dispenser.

4. Close the washer lid.

5. Turn the LOAD SIZE selector to the correct setting for your

wash load and the type of fabric being washed.

Choose a load size that allows the load to move freely for

best fabric care. See "Loading."

You may change the load size selection after the washer

has started filling by turning the selector to a different

setting.