Fireline FXi 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} Fireline FXi에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fireline FXi 16 페이지. Taper multi fuel stove insert
Fireline FXi에 대해서도 마찬가지입니다: 설치 및 운영 지침 (16 페이지), 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

1. List of Components

Description of Parts

FGi/FXi/FPi Stove Assembly

Multi Tool

Ash Pan

Flue Spigot Collar

Spigot Collar fixing screws & nuts

Stove Operating Gloves

2. Component Identification and Preparations for

Installation

Fig 2 – FGi/FXi/FPi 5 Taper Stove Assembly and controls

Your stove comes packed in a plywood crate. Carefully remove the straps and lift

off the upper crate. Remove any plastic packaging, open the door and remove all

the contents. See List of Components section and check contents carefully.

2.1 To remove the baffle plate, first remove the two side firebox liners. Now remove the

firebox rear liner and fuel retainer bars. Handle & store very carefully to one side

where the liners will not get broken.

2.2 Now the baffle plate can be removed by lifting off its supports and bringing out

through the firebox door opening.

2.3 The flue spigot collar can now be removed from inside the firebox. Use 3mm

ceramic gasket provided or fire cement to re-seal later.

Qty

FXiT.FPiT.FGiT

Fig 1 - Multi Tool Details

FPi5 Taper Stove Shown

Issue 02 10/12