Whirlpool 4GNTW4400 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Whirlpool 4GNTW4400에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4GNTW4400 27 페이지. Top-loading washer
Whirlpool 4GNTW4400에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (27 페이지), 사용 및 관리 매뉴얼 (44 페이지)

페이지 인쇄

POWER CORD INSTALLATION

"a,

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug power supply cord into an grounded outlet. Turn power

supply on.

Select

plug

Select the plug that fits with the electric receptacle.

18,

Secure

power cord

Secure the power cord by seating the connection

on the cord

lock. Place the cord lock cover and push until it snaps. Make

sure the power cord connection is seated on the cord lock and

that the cord lock clamps correctly.

COMPLETE INSTALLATION

CHECKLIST

[_ Check electrical requirements.

Be sure you have correct

electrical supply and recommended

grounding method.

[_ Check that all parts are now installed. If there is an extra

part, go back through steps to see what was skipped.

[_ Check that you have all of your tools.

[_ Check that shipping materials were completely

removed from washer.

Check that water faucets are on.

Check for leaks around faucets and inlet hoses.

Remove film from console and any tape remaining on washer.

Check that washer is plugged into a grounded

outlet.

Dispose of/recycle all packaging materials.

Read "Washer Care" in your Use and Care Guide.

To test and clean your washer, measure 1/2 of normal

recommended

amount of powdered or liquid detergent

and pour it into washer basket or detergent dispenser

(on some models). Close lid. Select any cycle. Start washer

and allow to complete full cycle.

Assemble the plug into the end of the power cord.