Whirlpool 4GNTW4400 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool 4GNTW4400에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4GNTW4400 44 페이지. Top-loading washer
Whirlpool 4GNTW4400에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (27 페이지)

페이지 인쇄

TROUBLESHOOTING

if you experience

First try the solutions suggested here to possibly avoid the cost of a service call.

Possible causes

Solution

Incorrect or wrong

wash or rinse

temperatures

Dry spots on load

High speed spins extract more

after cycle

moisture than traditional top-load

washers.

Check for proper water supply.

Energy saving controlled

wash temperatures.

Load not rinsed

Check for proper water supply.

Using too much detergent.

Washer not loaded as recommended.

Using too low a load size/water level

selection.

Sand, pet hair, lint,

Heavy sand, pet hair, lint, and

etc. on load after

detergent or bleach residues may

washing

require additional rinsing.

Load is tangling

Washer not loaded as recommended.

See "Using Your Washer" section.

Not cleaning or

removing stains

Washer not loaded as recommended.

Adding detergent on top of load.

The high spin speeds combined with air flow during the final

spin can cause items near the top of the load to develop dry

spots during the final spin. This is normal.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and

have both hot and cold water flowing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

This washer uses cooler wash and rinse water temperatures

than your previous washer. This includes cooler hot and warm

washes.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water flowing to the

inlet valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from too much detergent can keep washer from

operating correctly. Always measure detergent and follow

detergent directions based on load size and soil level.

The washer is less efficient at rinsing when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Choose a load size (water level) that matches the load being

washed.

Add an Extra Rinse to the selected cycle (on some models).

Select a cycle with a slower wash action and spin speed;

however, items will be wetter than those using a higher

speed spin. See the "Cycle Guide" to match your load with the

best cycle.

Load garments in loose heaps evenly around the basket wall.

Reduce tangling by mixing types of load items. Use the

recommended

cycle for the type of garments being washed.

Washer is less efficient at cleaning when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Add only 1 or 2 additional garments after washer has started.

Add detergent, oxi products, and color-safe bleach to the

bottom of the basket before adding the load items.

Using too low a load size/water

Choose a load size (water level) that matches the load being

level selection,

washed,