Whirlpool 4KWTW5800JW1 사용 및 관리 매뉴얼 - 페이지 18

{카테고리_이름} Whirlpool 4KWTW5800JW1에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4KWTW5800JW1 40 페이지. Top-loading high efficiency washer

TROUBLESHOOTING

If you experience

Washer Not Performing As Expected (cont.)

Odors

Lid Locked light

is flashing

Single-dose laundry

packet not dissolving

Washer pumps out water

before finishing cycle

EU representative: Whirlpool EMEA S.p.A., Via Carlo Pisacane n. 1, 20016 Pero (MI), Italy

Manufacturer: Whirlpool Corporation, 2000 N M 63, Benton Harbor, MI 49022 USA

For more information, visit us at www.whirlpool.sa or contact the dealer from whom you purchased your washer or a Whirlpool

authorized service company.

First try the solutions suggested here to possibly avoid the cost of a service call.

Possible Causes

Monthly maintenance not done

as recommended.

Using too much detergent.

The lid is not closed.

A cycle was stopped or paused using

the Start/Pause/Cancel/Unlock Lid

button.

Adding laundry packet incorrectly.

Lid is left open for more than

10 minutes.

See "Washer Care" in Washer Maintenance.

Unload washer as soon as cycle is complete.

Be sure to measure correctly. Always follow the manufacturer's

directions.

See "Washer Care" section.

Close the lid. The washer will not start or fill with the lid open.

The washer may still be spinning. The lid will not unlock until the

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics.

Be sure laundry packet is added to washer basket before adding

clothes. Do not add packet to dispenser. Follow the

manufacturer's instructions to avoid damage to your garments.

Make sure lid is closed before starting a cycle and/or during

prewash (soak).

Solution