Whirlpool 4KWTW5900JW1 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Whirlpool 4KWTW5900JW1에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4KWTW5900JW1 40 페이지. Top-loading high efficiency washer

Control Panel and Features

SOIL LEVEL

Soil Level settings adjust the agitation time as needed for

your load. The Light setting is for lightly soiled garments and

the Heavy setting is for garments that need longer wash time

to release the soils from the fabric.

WASH TEMP

Temperature Control senses and maintains uniform water

temperatures by regulating incoming warm and cool water.

This ensures the correct temperature is used to maximize

cleaning while protecting the garments.

Select a wash temperature based on the type of fabric

and soils being washed. For best results and following

the garment label instructions, use the warmest wash

water safe for your fabric.

NOTES:

The temperature of hot and cold water depends upon

the temperature of the water entering your washer.

Warm and cool water will be cooler than what your

previous washer provided.

Even in a cold and cool water wash, some warm water

may be added to the washer to maintain a minimum

temperature.

Not all features and options are available on all models.

Appearance may vary.

DEEP FILL (on some models)

Set at "Yes" to add extra water to any cycle. Water will be

added automatically, with the amount determined by the size

of the load.

NOTE: Washer will continue to operate with agitation even

as water is added.

WASH CYCLE KNOB

Use the Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

See "Cycle Guide" for detailed descriptions of cycles.

START/STOP/PAUSE/UNLOCK LID BUTTON

Press to start the selected cycle.

Press again to pause the cycle and unlock the lid.

Press and hold for 3 seconds to cancel a cycle.

NOTE: If the washer is spinning, it may take several

minutes to unlock the lid.

Use to Manually Soak Garments:

Press START/STOP/PAUSE/UNLOCK LID and keep the lid

closed. After items have soaked for the desired time, press

START/STOP/PAUSE/UNLOCK LID to resume the wash

cycle.