Whirlpool 4PLBR8543JQ2 사용 및 관리 매뉴얼 - 페이지 6

{카테고리_이름} Whirlpool 4PLBR8543JQ2에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4PLBR8543JQ2 20 페이지. Two speed automatic washers

페이지 인쇄

Starting Your Washer

Fire Hazard

Never place items in the washer that are

dampened with gasoline or other flammable

fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

1. Measure detergent and pour it into the washer. If desired, add

powdered or liquid color safe bleach. Add extra detergent for

the Super Wash cycle.

Drop a sorted load of clothes loosely into your washer.

Load evenly to maintain washer balance. Mix large and small

items.

Items should move easily through the wash water.

Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some

synthetic knits, use a large load size to provide more space

(see step 5).

2. (OPTIONAL) Pour measured liquid chlorine bleach into the

liquid chlorine bleach dispenser (on some models). Bleach

will be diluted automatically during the wash part of the cycle.

Never use more than 1 cup (250 mL) for a full load. Use

less with a smaller load size.

Follow the manufacturer's directions for safe use.

To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer

basket.

Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see "Adding

Liquid Chlorine Bleach."

3. (OPTIONAL) Pour measured liquid fabric softener into the

liquid fabric softener dispenser (on some models). Softener is

added automatically during the rinse portion of the cycle.

Dilute liquid fabric softener by ﬁlling the dispenser with warm

water until liquid reaches the crossbar in the opening.

Do not spill or drip any fabric softener on the clothes.

Use only liquid fabric softener in this dispenser.

NOTE: On models without a fabric softener dispenser, see

"Adding Liquid Fabric Softener."

4. Close the washer lid.

5. Turn the LOAD SIZE selector to the correct setting for your

wash load and the type of fabric being washed.

Choose a load size that allows the load to move freely for

best fabric care. See "Loading."

You may change the load size selection after the washer

has started ﬁlling by turning the selector to a different

setting.