Whirlpool 6301 부품 및 서비스 매뉴얼 - 페이지 19
{카테고리_이름} Whirlpool 6301에 대한 부품 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 6301 19 페이지.
페이지 인쇄COMPONENT CHECK GUIDE
7 Wash / Spin
motor
8 Timer
9 Wash Timer
11 Circuit breaker No spin
12 Drive assy
This document is only intended for qualified technicians who are aware of the respective safety regulations.
th
First release Date 12
Mar, 2003
Document No. WOI/WM/2003/009
Noisy Operation
Visually check the damages on
Wash / Spin
pulley and refer, also check for
free rotation of the rotor. If any
damages noticed or the rotor not
rotating freely indicates defective
motor (Wash & Spin).
Electric current
Check the motors for short
leakage
between body and terminals
using a multimeter. If meter
shows continuity, it indicates
motor is defective.
No spin
Check continuity between the
terminals of the spin timer using a
multimeter.
1. In OFF position the meter should read infinit
resistance.
2. In ON position the meter should read zero Ohms.
If the meter not showing as per above statements it
indicates defective spin timer
Not advancing
Set the Timer to one position and
check the knob whether coming
back to OFF position. If not
coming indicates defective spin
timer.
Not advancing /
Set the timer to one position and
No Wash
check the knob whether coming
back to OFF position after
switching On the machine. If not
coming indicates defective wash
timer
Adjust / Replace the circuit
breaker and check for the
continuity using a multimeter. If
no continuity indicates circuit
breaker defective.
Noisy agitation
Visually check for excessive play
in the shaft. If anything as above
noticed indicates defective drive
assy.
Subject to modification
Cont'd
Replace the
Wash / Spin
motor.
Replace the
motor.
Replace the spin
timer
Replace the spin
timer.
Replace the wash
timer.
Make contact
between the two
leads to the
circuit breaker
assy.
Replace the drive
assy