Whirlpool 6LSR7244EQ0 사용 및 관리 매뉴얼 - 페이지 6
{카테고리_이름} Whirlpool 6LSR7244EQ0에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 6LSR7244EQ0 16 페이지. One and two speed automatic washers
페이지 인쇄
OPERATING YOUR WASHER
U
SING YOUR WASHER
4.
(OPTIONAL STEP) Pour measured liquid fabric
softener dispenser, see Step 12.
Dilute liquid fabric softener by filling the dispenser
5.
Close the washer lid.
6.
Turn the Load Size selector to the correct setting
different setting. If your washer has a RESET
option, first move the selector to RESET, then
to the new water level.
6
.
( CONT
)
softener into the
liquid fabric softener
dispenser.
•
Do not spill or drip
any fabric softener on
the clothes.
•
Make sure you use
only liquid fabric soft-
ener in this dispenser.
•
If your model does
not have a liquid fabric
with warm water until
liquid reaches the
crossbar in the opening.
•
Softener is added
automatically during
the rinse portion of
the cycle.
for your wash load and
the type of fabric being
washed.
•
Choose a load size
that allows the load to
move freely for best
fabric care.
•
Change the setting
after the washer has
started filling by turning
the selector to a
7.
Set the Water Temperature selector to the correct
•
Use the warmest water safe for fabric.
•
Follow garment label instructions.
HOT: 49°C (120°F) or above
– Whites and pastels
– Heavy and greasy soils
WARM: 32° to 44°C (90° to 110°F)
– Bright colours
– Moderate to light soils
COLD: 21° to 32°C (70° to 90°F)
– Colours that bleed or fade
– Light soils
8.
(OPTIONAL STEP) Some models have an
Extra Rinse selector. For an additional rinse
and spin at the end of a wash cycle, set the
Extra Rinse selector to ON.
9.
(OPTIONAL STEP) Some models have a Cycle
Signal option. Set the Cycle Signal selector to
On if you want your washer to sound a signal
when the wash cycle is finished. This signal is
helpful when you are washing items that
should be removed from the washer as soon
as the cycle ends.
setting for the type of
fabric and soils being
washed.