Whirlpool 7MLSR5132 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Whirlpool 7MLSR5132에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7MLSR5132 28 페이지. Whirlpool automatic washers use & care guide

페이지 인쇄

6. Push in the Cycle Control knob and turn it clockwise to the

wash cycle you want. Reduce the wash time when using a

small load size setting. See "Selecting a Cycle and Time."

Pull out the Cycle Control knob to start the washer.

To stop or restart your washer

To stop the washer at any time, push in the Cycle Control

knob.

To restart the washer, close the lid (if open) and pull out

the Cycle Control knob.

7. (OPTIONAL STEP) If desired, add measured liquid fabric

softener to the final rinse water. See "Adding Liquid Fabric

Softener."

Selecting a Cycle and Time

This section describes the available wash cycles and will help

you make the best cycle selections for your wash loads. Each

cycle is designed for different types of fabric and soil levels.

The washer pauses briefly throughout each cycle. These

pauses are normal. Refer to "Normal Sounds" to learn more

about the sounds you may hear during a wash cycle.

Refer to "Understanding Washer Cycles" to learn what

happens during a wash cycle.

NOTE: This manual covers several different models. The washer

you purchased will not have all of the cycles described.

Casual/Planchado Permanente

(Casual/Permanent Press cycle)

This cycle features a cool-down rinse to minimize wrinkling of

permanent press blends and synthetic fabrics. Select 6 to 10

minutes of wash time to clean lightly to moderately soiled loads.

Lavado Rápido (Quick Wash cycle)

This cycle features low-speed agitation for gentle soil removal,

while providing high spin speeds to shorten drying times. Select

this cycle for small loads of lightly soiled items that you need in a

hurry.

Pre-Lavado (Pre-Wash cycle)

The Pre-Wash cycle features 4 minutes of agitation to help

remove heavy soils and stains that need pretreatment. This cycle

provides additional washing prior to the desired cycle. Because

the Pre-Wash cycle does not rinse, a new wash cycle should be

selected after the Pre-Wash cycle ends.

Normal cycle

This cycle features high-speed agitation for maximum cleaning,

and high-speed spin to shorten drying time. Select up to 14

minutes of wash time, depending on your model, to clean large

loads of sturdily constructed fabrics that are heavily soiled. For

lightly soiled cottons and linens, use the shortest time setting.

Delicado (Gentle cycle)

This cycle features a series of brief agitations and soaks, followed

by a short spin. Select up to 6 minutes of wash time to gently

clean special-care items that are lightly or moderately soiled.

Cycle Time and Temperature Options

Some models have the water temperature included in the cycle

selections of the Cycle Control knob.

Selecting different time and temperature combinations:

To select different wash time and temperature combinations, first

select the water temperature (Caliente [Hot], Tibio [Warm], or Frío

[Cold]), then turn to the new wash time. For example, for 14

minutes of wash time in the Normal cycle with Cold water:

1. Push in the Cycle Control knob, and turn it clockwise to the

Frío (Cold) setting.

2. Pull out the Cycle Control knob and allow washer to fill.

3. When the washer has filled, push in and turn the Cycle

Control knob to 14 minutes of wash time.

4. Pull out the Cycle Control knob to start washer.

Adding bleach to models without a bleach dispenser

If desired, add measured liquid chlorine bleach after the washer

starts agitating. Pour diluted bleach around the agitator, not

directly onto the load. Undiluted bleach will damage any fabric it

touches. (See "Adding Liquid Chlorine Bleach.")

Adding softener to models without a fabric softener

dispenser

If desired, add measured liquid fabric softener to the final rinse

water. Always dilute fabric softener with ½ to 1 cup

(125 to 250 mL) of warm water. Undiluted fabric softener can

stain fabrics. (See "Adding Liquid Fabric Softener.")