Whirlpool 7MWFW72HEDW0 사용 및 관리 매뉴얼 - 페이지 20

{카테고리_이름} Whirlpool 7MWFW72HEDW0에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7MWFW72HEDW0 48 페이지.

페이지 인쇄

Troubleshooting

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help

In Canada www.whirlpool.ca

for assistance and to possibly avoid a service call.

Causes

Solution

Possibme

Desired setting or

option does not light

Load not rinsed

Load is wrinkled,

twisted, or tangled

Not cleaning or

removing stains

For best performance,

not all settings

are available with each cycle, and

some options cannot be used together.

Check for proper water supply.

Not using HE detergent or using too

much HE detergent.

Washer not loaded as recommended.

The load may be out of balance.

Washer not loaded as recommended.

Wash action too long for load.

Spin speed too fast for load.

The washer is not unloaded promptly.

Not choosing the right cycle for the

load being washed.

The wash water was not warm

enough to relax wrinkles.

Washer not loaded as recommended.

See the "Cycle Guide" for the available settings and options for

Add only 1 or 2 garments after washer has started.

Not using HE detergent or using too

Use only HE detergent. Always measure detergent and follow

much HE detergent,

manufacturer's

directions based on load size and soil level.

Hard water or high level of iron (rust)

You may need to install a water softener and/or iron filter.

in water.

Fabric softener dispensing ball used.

Dispensing balls will not operate correctly with this washer.

Add liquid fabric softener to the fabric softener compartment.

Powdered detergent used for

Consider using liquid detergent.

slow-speed

cycle.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water flowing to the

inlet valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from regular detergent can cause the washer

to operate incorrectly.

Use only HE detergent. Always measure detergent and follow

manufacturer's

directions based on load size and soil level.

Avoid tightly packing the washer. The washer will not rinse well

if tightly packed. Load with dry items only. See the "Cycle

Guide" for load size recommendations

for each cycle.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 garments after washer has started.

When load unbalance occurs, a washing process will start

to redistribute

the load. This may lengthen the cycle time.

Avoid washing single items. Balance a single item such as

a rug or jeans jacket with a few extra items.

Add load loosely. Items need to move freely reduce

wrinkling and tangling. See the "Cycle Guide" for load

size recommendations

for each cycle.

Reduce tangling by mixing types of load items. Use the

recommended

cycle for the type of garments being washed.

Select a lower soil level. Note that items will not be cleaned

as deeply as when using a higher soil level.

Select a slower spin speed. Note that items will be wetter than

when using a faster speed spin.

Unload the washer as soon as it stops or use TumbleFresh _

if you will not be able to unload the washer at the end of the

cycle.

Use the Delicates cycle or another cycle with a slow spin

speed to reduce wrinkling.

If safe for load, use warm or hot wash water.

Add load loosely. Items need to move freely for best cleaning.

See the "Cycle Guide" for load size recommendations

for each

cycle.

each cycle.