Whirlpool 7MWTW1700EM1 사용 및 관리 매뉴얼 - 페이지 28

{카테고리_이름} Whirlpool 7MWTW1700EM1에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7MWTW1700EM1 32 페이지. Top-loading washer

페이지 인쇄

Troubleshooting

First try the solutions suggested here to possibly avoid the cost of a service call.

If you experience

Washer not performing as expected (cont�)

Incorrect or wrong wash

Check for proper water supply.

or rinse temperatures

Energy-saving controlled wash

temperatures.

Load not rinsed

Check for proper water supply.

Using too much detergent.

Washer not loaded as recommended.

Using too low a load size/water

level selection.

Sand, pet hair, lint, etc.

Heavy sand, pet hair, lint, and

on load after washing

detergent or bleach residues may

require additional rinsing.

Load is tangling

Washer not loaded as recommended.

Not cleaning or

Washer not loaded as recommended.

removing stains

Adding detergent on top of load.

Using too low a load size/water

level selection.

Using too much detergent.

Not using correct cycle for

fabric type.

Possible Causes

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and have

both hot and cold water flowing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

This washer uses cooler wash and rinse water temperatures than your

previous washer. This includes cooler hot and warm washes.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water flowing to the inlet valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from too much detergent can keep washer from operating

correctly. Always measure detergent and follow detergent directions

based on load size and soil level.

The washer is less efficient at rinsing when load is tightly packed.

Load garments in loose heaps evenly around the basket wall. Load with

dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Choose a load size (water level) that matches the load being washed.

Add an Enjuague Adicional (Extra Rinse) (on some models) to the

selected cycle.

See "Using Your Washer" section.

Select a cycle with a slower wash action and spin speed; however,

items will be wetter than those using a higher speed spin. See the

"Cycle Guide" to match your load with the best cycle.

Load garments in loose heaps evenly around the basket wall.

Reduce tangling by mixing types of load items. Use the recommended

cycle for the type of garments being washed.

Washer is less efficient at cleaning when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Add only 1 or 2 garments after washer has started.

Add detergent, oxi products, and color-safe bleach to the bottom of the

basket before adding the load items.

Choose a load size (water level) that matches the load being washed.

The suds from too much detergent can keep washer from operating

correctly. Always measure detergent and follow manufacturer's

directions based on load size and soil level.

Use a higher soil level cycle option and warmer wash temperature to

improve cleaning.

Use Heavy cycle for tough cleaning. See the "Cycle Guide" to match

your load with the best cycle.

Solution