Whirlpool 7MWTW1935DW0 사용 및 관리 매뉴얼 - 페이지 9
{카테고리_이름} Whirlpool 7MWTW1935DW0에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7MWTW1935DW0 36 페이지.
7, Select SOIL LEVEL
SOiL LEVEL
Heavy o
Med
Light
o
Ex Light
Once you select a cycle, select the desired soil level by turning
the Soil Level knob to the desired setting.
8, Select WASH TEMP
WASH
TEMP
Hot
o
Warm o
Cool 0
Cold o
Tap Cold o
9, Select cycle options, if desired
RINSE OPTIONS
PRESOAK
o
IRinse
0 Off
O 2 Rinses
o On
ol Rinse
with
softener
2 Rinses
with
softener
If you would like to add an extra rinse, fabric softener or extra
soak period to any cycle, turn the knob to desired setting.
1 0, Press START/Pause
to begin wash cycle
Start
/ Pause
Hold 3 Seconds
to Cancel
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Wash Temp
Suggested Fabrics
Hot
Some cold water is added to save
Whites and pastels
energy. This will be cooler than
Durable garments
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist in
Colors that bleed
soil removal and to help dissolve
or fade
detergents.
Light soils
Cold
Warm water may be added to
Dark colors that
assist in soil removal and to help
bleed or fade
dissolve detergents.
Light soils
Tap Cold
This is the temperature
from your
Dark colors that
faucet,
bleed or fade
Light soils
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking
the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.