Whirlpool AWM 320 빠른 참조 매뉴얼 - 페이지 11
{카테고리_이름} Whirlpool AWM 320에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AWM 320 17 페이지.
페이지 인쇄
The appliance will not switch on.
•
Power plug properly inserted in mains
socket?
•
Mains fuse OK?
•
Power failure?
•
Tap turned on? Is water coming through?
•
Door closed? Child safety device activated?
•
Programme selected?
•
ON/OFF button pressed?
No water or insufficient water supply.
•
Tap turned on completely?
•
Kink in water hose?
•
Water hose filter clogged? (See "Care and
Maintenance").
•
Water hose frozen up?
Waste water not pumped out.
•
Drain hose installed correctly? (See
"Installation Instructions").
•
Filter clogged? (See "Removing the Filter /
Draining Residual Water").
•
Drain hose frozen up?
•
Is the rinse hold button pressed?
Before contacting After-Sales Service:
1. Try to remedy the problem (see "Trouble-
Shooting Guide").
2. Restart the programme to see if the fault is
repeated.
3. If the malfunction persists, call After-Sales
Service and specify:
•
The nature of the problem.
•
The exact model of the appliance.
•
The service code
(number after the word SERVICE).
The After-Sales Service sticker is on the
inside of the door.
•
Your full address.
•
Your telephone number and area code.
•
The After-Sales Service telephone number
and address can be found in the warranty or
on application to the retailer.
TROUBLE-SHOOTING GUIDE
AFTER-SALES SERVICE
Detergent and additive product residues in
detergent drawer at end of wash.
•
Siphon installed correctly?
•
Siphon clogged?
•
Not enough water delivered? (See above).
•
Also see "Detergent and Additives" and
"Care and Maintenance".
Machine vibrates during spin cycle.
•
Machine perfectly horizontal with all four feet
on ground? (See "Installation Instructions").
•
Transit bolts removed? The transit bolts must
be removed before the machine is used (see
"Installation Instructions").
Final spin results are poor.
•
Pump impeller obstructed? (See "Removing
the Filter / Draining Residual Water").
•
Wash consists of a single heavy/large size
article (bathrobe, etc.)? If this is the case the
wash machine may detect load imbalance
and activate the spin cycle at reduced speed.
In this case add further garments and repeat
the spin cycle.
13