Whirlpool 2183013 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool 2183013에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 2183013 24 페이지. Whirlpool refrigerator 2183013 use and care guide

Connecting

to refrigerator

(On kit models, assemble water valve to

refrigerator per kit instructions.) Route the

copper tubing through the tube clamp

provided as shown at right. Connect the

X-inch copper tube from the shut-off

valve to the water valve at the lower, left

rear of cabinet. Remove tape label from

valve inlet and insert tubing until it

bottoms out. (Approximately l/2 inch.)

Tighten nut by hand as much as possible;

then turn the nut an additional l/2 turn

using a wrench. Do not over tighten.

2. Turn shut-off

valve ON. CHECK FOR

LEAKS. TIGHTEN ANY CONNECTIONS

(INCLUDING

CONNECTIONS

AT THE

VALVE) OR NUTS THAT LEAK.

3. The ice maker is equipped with a built-in

water strainer. If local water conditions

require periodic cleaning or a well is your

source of water supply, a second water

strainer should be installed in the S-inch

water line. Obtain a water strainer from

your nearest appliance dealer. Install at

either tube connection.

4. Reconnect electrical supply to refrigerator.

Use only %-Inch

copper tublng

from cold

water llne

*Tube clamp