Whirlpool 3ET16NKXDG00 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool 3ET16NKXDG00에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3ET16NKXDG00 29 페이지. No-frost refrigerator-freezer

페이지 인쇄

Adjusting

the EZ-Trackm

refrigerator

shelf

(on some

models)

The U-Track shelf slide from side to side

for more flexible storage in your refrigerator.

To slide shelf sld+tmMe:

1. Lii slightly on shelf front.

2. Slide to desired bcatbn.

Lower shelf front to level position.

NOTE: You do not have to remove small

items from the shelf before moving it side-to-

side. You may need to remove larger items.

To remove the shelf:

1. Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lii front of shelf to 45" angle.

4. Lower shelf slightly to release shelf from

upper channel of track Then pull shelf

straight out.

NOTE: Shelf is heavy. Make sure you use

both hands when removing shelf.

To remove shelf track:

1. Lii both sides of track slightly.

2. Pull track straight out.

To replace shelf track:

1. Guide track hooks into the shelf support

slots on the back wall of the cabinet.

NOTE: Make sure all three track hooks

are in slots and that the slots are parallel

to each other.

Push track backward and down.

3. Check that track is completely seated in

the shelf supports.

then slide to new location.

Umer

channel

HoM wtth both hands

and lift front to 45' angle.

Hold both sides and

lift

and out

Make

sure

both

sets of

hooks

are in

suppoRt

slots.

Shetf

support