Whirlpool 3ET18DK 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool 3ET18DK에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3ET18DK 26 페이지. No-frost refrigerator-freezers
Whirlpool 3ET18DK에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (20 페이지)

페이지 인쇄

1. Parts and Features

Adjusting

the lateral-adjust

shelf

To slide shelf side-to-side:

1. Lift slightly on shelf front.

2. Slide to desired location.

3. Lower shelf front to level position.

NOTE: You do not have to remove small

items from the shelf before moving it side-to-

side. You may need to remove larger items.

To remove the shelf:

1. Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lift front of shelf to 45" angle.

4. Lower shelf slightly to release shelf from

upper channel of track. Then pull shelf

straight out.

NOTE: Shelf is heavy. Make sure you use

both hands when removing shelf.

To remove shelf track:

1. Lift both sides of track slightly.

2. Pull track straight out.

To replace shelf track:

1. Guide track hooks into the shelf support

slots on the back wall of the cabinet.

NOTE: Make sure all three track hooks

are in slots and that the slots are parallel

to each other.

2. Push track backward and down.

3. Check that track is completely seated in

the shelf supports.

Lift front slightly.

' '

Then slide to new location.

Uooer channel

Hold with both hands

and lift front to 45" angle.

Hold both sides and

lift up and out.

Make

sure all

3 sets of

hooks

are in

support

slots.