Whirlpool 3ET18ZK 사용 및 관리 매뉴얼 - 페이지 10

{카테고리_이름} Whirlpool 3ET18ZK에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3ET18ZK 19 페이지. No-frost refrigerator-freezers
Whirlpool 3ET18ZK에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (21 페이지)

Whirlpool 3ET18ZK 사용 및 관리 매뉴얼
Removing
the crispers
and crisper
cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom, then
slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back corner of cover frame into notch
supports on walls of refrigerator, then lower
front onto metal cover support.
3. Slide back of glass insert into cover frame.
Then lower front to level position.
Remove the
glass insert.
Lift front of
cover frame,
then the back.
Removing
the freezer
shelf
To remove the shelf:
1. Lift front of shelf slightly.
2. Lift back of shelf off supports.
3. Replace in reverse order.
Using
the ice cube
trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation.
The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
10