Whirlpool 3VETlSDK 사용 및 관리 매뉴얼 - 페이지 12

{카테고리_이름} Whirlpool 3VETlSDK에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3VETlSDK 20 페이지. No-frost refrigerator-freezer
Whirlpool 3VETlSDK에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (22 페이지)

페이지 인쇄

Changing

the light

bulbs

Electrical

Shock Hazard

Before removing a light bulb, either

unplug the refrigerator or disconnect

the electricity leading to the refrigerator

at the main power supply.

Failure to do so could result in electri-

cal shock or personal injury.

To change the refrigerator

light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Panel to remove

bulb.

3. Replace with a 40-watt appliance bulb.

4. Reconnect refrigerator to power supply.

To change freezer light (3VET23DK):

1. Disconnect refrigerator from power supply.

2. Grasp the top and bottom of the light shield.

3. Squeeze and pull light shield out.

4. Replace with a 25-watt appliance bulb.

5. Snap light shield into place.

6. Reconnect refrigerator to power supply.

NOTE: Not all commercial appliance bulbs will

fit your refrigerator. Be sure to replace a bulb

with one of the same size and shape.

Removing

the base grille

To remove the grille:

1. Open refrigerator door.

2. Pull base grille forward to release the

support tabs from the metal clips.

3. Do not remove Tech Sheet fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal

clips.

2. Push firmly to snap into place.

3. Close refrigerator door.

See cleaning instructions for defrost pan and

condenser coils on page 15.

Condenser

coils