Whirlpool 4322658A 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool 4322658A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4322658A 48 페이지. In-door ice system

Water Delivery

Water is delivered to the ice maker mold by

means of a "tube-within-a-tube" design. A con-

duit system consisting of three separate pieces

(liner fitting, conduit, back panel fitting) is

foamed into place in the cabinet.

This conduit provides a pathway from the

freezer liner to the back panel. The majority of

this system is routed above the refrigerator liner

to prevent the water tubing from freezing. The

tubing that delivers the water is routed through

the conduit, and is secured by snapping into

place at the freezer liner fitting.

Water Nozzle

2-2

The water tube is made of polypropylene with

an overmolded santoprene nozzle. Due to the

rigid nature of the polypropylene, this tube is

mated to a more flexible polyethylene tube with

a John Guest fitting high on the back panel.

This change of material is necessary to pre-

vent kinking when the tubing is attached to the

water valve.

Water

Tube

John

Guest

Fitting

Back Panel Fitting