Whirlpool 7S21FNI SL 서비스 매뉴얼 - 페이지 5
{카테고리_이름} Whirlpool 7S21FNI SL에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7S21FNI SL 7 페이지. How to install the handle door
Whirlpool 7S21FNI SL에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 설치 방법 (4 페이지)
페이지 인쇄
Quick Freeze Icon:
Under the "Quick Freeze" mode, press and hold the "Freezer Temperature Adjustment" button for 3 seconds to adjust the
"Quick Freeze" mode duration; it can range between 6-24 hours.
Lock/Unlock Button:
If buttons have not been pressed for 30 seconds, it will go into lock state automatically.
Under the unlocked state, press the Lock / Unlock button for 3 seconds; the control panel will be disabled and a lock icon
will be lighted.
Under the locked state, press the Lock / Unlock button for 3 seconds; the control panel will activate and the lock icon will be
extinguished.
V. Fault Handling
1. Fault Codes
Refrigerator temperature display flashes "E1"
Freezer temperature display flashes "E2"
Freezer temperature display flashes "E9"
Freezer temperature display flashes "E6"
2. Common Faults and Maintenance
Common Faults
Refrigerator is not cooling
Refrigerator compartment is
Fault Code Display
Possible Reason
Compressor is not working / cannot
start up.
Compressor frequent tripping
Fault Code Description
Refrigerator temperature sensor failure
Freezer temperature sensor failure
Defrost sensor failure
Communication Failure
Troubleshooting
Check if:
- the PTC starter relay is damaged
- the voltage input to the control board
is normal;
Check if:
- the overload protection device is
damaged
- the compressor running current is
normal, if the current is too low, check
the refrigerant leaks.
Check every connection of PCB, make
sure that there are no loose