Acom PC-100 운영 매뉴얼 - 페이지 9

{카테고리_이름} Acom PC-100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acom PC-100 18 페이지. Price computing scale ec version
Acom PC-100에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

Acom PC-100 운영 매뉴얼
ECR Interface
Instructions for Setting the RS-232 Port
If you have Purchased your PC-100 scale with the RS-232 kit you will be
Able to interface you scale to a PC or virtually any ECR(Electronic Cash
Register) if you do not have this Feature or aren't sure. Please contact
your local ACOM Authorizes Dealer to assist you. The following page will
explain the RS-232setup.
Type Setting:
The PC-100 communicates using the following protocol: 9600 Baud, Even
Parity, 7 Data, and 1 Stop Bit. This is fixed and cannot be changed How
ever, there are different request codes and response data that can be
selected. The following explains how set the different Type Settings.
1. Turn the scale OFF
2. Press and hold down the * key while you turn the scale ON
3. Release the * key ones you hear the scale beep
4. You will see a value in the Unit Price display. You may change this
value according to the chart below.
5. Once you are done setting the value, press the * key
Basic Description
Disable RS-232 Port
NCI General Interface (Most P.O.S. Systems)
NCI ECR Interface (Most Cash Registers)
Toledo 8213 (Many Cash Register)
Stream Mode
Hand Shake Mode
See next page for Cash Register and personal computer model cross
reference chart. You will find that the PC-100 scale will interface to the
most popular makes and models.
9
Type
Setting
00
01
02
03
10
20