Cal Test Electronics CT3684 사용자 설명서 - 페이지 7

{카테고리_이름} Cal Test Electronics CT3684에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cal Test Electronics CT3684 17 페이지.

3 Using the Probe

Connect the 9 VDC adapter to the input on the probe. See Figure 1.

Plug the adapter to power.

WARNING

At the time of powerig on the probe, the input leads must not be

connected to an item to be tested. Never operate the probe with the

case open.

If using the optional battery pack, CT3729, the batteries supplied must

be inserted into the battery pack and the pack attached to the probe.

See Figure 2.

Figure 2 Replacing the Batteries

Open the battery compartment. If necessary, the old AA batteries can

then be removed and the new ones inserted into the compartment.

Always ensure the batteries are positioned for proper polarity. After

inserting the batteries, close the case. When the batteries are low, the

power indicator will start to flicker and dim.

800-572-1028

caltestelectronics.com