Backyard Creations 272-4293 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} Backyard Creations 272-4293에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Backyard Creations 272-4293 14 페이지. Galloway bar top & base

Figure 4a

Figure 4b

5. With the help of another person, carefully place the table top onto the firepit base. After

making any necessary adjustments to the alignment of the table top and the assembled base,

use four 1/4"x40 mm bolts and Ø20xØ6.5x2.0 mm as shown in Figure 5. Hand tighten only.

Figure 5

6. After making any necessary adjustments to the alignment of the unit, use the hex bolt driver

to tighten all bolts. Repeat until all bolts are tight. Do not over tighten. Over tightening may

strip bolts.

7. Place the burner pan protective ring into the firepan/burner assembly as shown in Figure 6.

Align the holes in the burner pan protective ring with the pre-drilled holes on the firepan/burner

assembly. Secure the burner pan protective ring to the firepan/burner assembly by using the

two M4 screws as shown in Figure 6.

Figure 6