Clam 108419 사용 설명서 - 페이지 4

{카테고리_이름} Clam 108419에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clam 108419 10 페이지.

5. Your shelter should be standing up completely (Photo 9).

Anchor the shelter to the ice by using ice anchors and

ropes (Expedition models). For Expedition FLR

models skip to page 5.

Screw ice anchors into the ice near the corners of the

shelter using Clam's Ice Anchor Installation Tool PN

108348 (not included). Feed the adjustable strap grommet

onto the ice anchor and cinch the strap tight (Photo 10).

Repeat for each anchor drilled into the ice. In windy

conditions you may need to screw an anchor outside the

shelter several feet away from the hub on the windward

side and attach a rope from the hub eye bolt to the remote

anchor. This will help keep the shelter in place and the

walls from collapsing. If more anchors are needed, order

PN 102457 via www.clamcorp.com/resources/parts.

Page 4

ASSEMBLY INSTRUCTIONS

Ice Anchors in corners. Shelter is

secured to the ice by hooking the

grommet on the strap to the anchor and

cinching the strap tight.

Photo 10