Whirlpool WSR57R18DM02 사용자 설명서 - 페이지 10

{카테고리_이름} Whirlpool WSR57R18DM02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WSR57R18DM02 13 페이지.

페이지 인쇄

Cleaning Your Refrigerator

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Clean the refrigerator about once a month to keep odors from

building up. Wipe up spills immediately.

To Clean Your Refrigerator:

Complete cleaning should be done at least once a year.

1. Press and hold TEMP SETTING for 3 seconds to turn off

cooling.

2. Unplug refrigerator or disconnect power.

3. Remove all removable parts from inside, such as shelves,

crispers, etc.

4. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

Do not use abrasive or harsh cleaners such as window

■

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners, or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

To help remove odors, you can wash interior walls with a

■

mixture of warm water and baking soda

(2 tbs to 1 qt [26 g to 0.95 L] of water).

5. Replace the removable parts.

6. Use the appropriate cleaning method for your exterior finish.

Painted Metal: Wash exteriors with a clean sponge or

soft cloth and a mild detergent in warm water. Do not use

abrasive or harsh cleaners or cleaners designed for stainless

steel. Dry thoroughly with a soft cloth.

7. Clean the condenser coils regularly. Coils may need to be

cleaned as often as every other month. This may help save

energy.

Open the refrigerator door and remove the base grille by

■

removing 2 Phillips-head screws and pulling the grille

toward you.

CARING FOR YOUR REFRIGERATOR

Use a vacuum with an extended attachment to clean the

■

condenser coils when they are dusty or dirty.

Replace the base grille by aligning the ends of the grille

■

with the leveling assemblies on each side and snapping

the grille into place. Reinstall the screws.

8. Plug in refrigerator or reconnect power.

9. Set temperature control to desired setting. See "Using the

Control."

Changing the Light Bulb(s)

IMPORTANT: The lighting system in this appliance may

consist of:

Sealed LED modules

■

LED Bulbs

■

Incandescent Bulbs

■

Sealed LED module is an LED which does not need to be

replaced. If a Sealed LED module(s) do not illuminate when the

refrigerator and/or freezer door is opened, call for assistance or

service. See "Warranty" for contact information.

If a LED Bulb does not illuminate when the refrigerator and/

or freezer door is opened, replace with like bulb following this

procedure:

1. Unplug the appliance or disconnect power.

2. Remove the light shield.

Remove the hardware holding the light shield in place.

■

Top of the appliance compartment - Slide the light shield

■

toward the back of the compartment to release it from

the light assembly.

3. Replace the burned-out bulb(s) with a LED bulb of the same

size, shape and wattage.

Order Part Number W10805744 (3.6 W).

■

NOTE: Some LED replacement bulbs are not recommended

for wet/damp environments. The refrigerator and freezer

compartments are considered to be wet/damp environments.

If using a brand of LED bulb other than the recommended

LED bulb, before installation, read and follow all instructions

on the LED packaging.

4. Replace the light shield by inserting the tabs on the shield

into the liner holes on each side of the light assembly. Slide

the shield toward the front until it locks into place.

NOTE: To avoid damaging the light shield, do not force the

shield beyond the locking Point.

5. Replace the hardware that holds the shield in place.

6. Plug in the appliance or reconnect power.

If an incandescent bulb does not illuminate when the refrigerator

and/or freezer door is opened, replace with like bulb using the

same procedure outlined above. Replace burned out bulb with

only incandescent bulb(s) of the same size, shape and wattage

(maximum 40 W) designed for household appliances.

Power Interruptions

If the power will be out for 24 hours or less, keep the door

closed to help food stay cold and frozen.

If the power will be out for more than 24 hours, consume or can

perishable food at once.

REMEMBER: If the condition of the food is poor, dispose of it.