Clam 10945 매뉴얼 - 페이지 5
{카테고리_이름} Clam 10945에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clam 10945 7 페이지. Escape ice thermal
TAKE-DOWN INSTRUCTIONS
1. Close all windows. Leave one or both doors open
to allow air to escape.
2. Remove all internal anchors and store them in
the provided pouch or in the carry bag side pocket.
In windy conditions, remove ice anchor straps from
anchors and store back in hub pockets prior to
collapsing the roof and walls. Gather outside
anchors and place back in pouch.
3. Push the center hub on any wall until it collapses
inward (Photo 7). Continue pushing each wall
inward until all the walls are collapsed (photo 8).
The shelter will fall to the ice on its own.
4. Push the hub of the roof panel down with one
hand while lifting up on one of the corners with the
other hand until it collapses (photo 9).
5. The shelter will now be flat. Lift up on one of the
corners of the shelter and flip the shelter over'
(Photo 10). Once flipped over, gather the shelter
together (Photo 11).
6. Place the folded shelter and the ice anchor/rope
pouch back into the carrying case with the hubs
toward the bottom end of the bag.
Make sure your ice shelter is completely dried out
after each use and before storing. Store your ice
shelter in a cool, dry place. Keep away from
rodents.
Page 5
TAKE-DOWN INSTRUCTIONS
Photo 10
Photo 11
Photo 7
Photo 8
Photo 9