AEQ Phoenix Mobile 애플리케이션 노트 - 페이지 7
{카테고리_이름} AEQ Phoenix Mobile에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. AEQ Phoenix Mobile 8 페이지. Audio codec system
AEQ Phoenix Mobile에 대해서도 마찬가지입니다: 애플리케이션 노트 (8 페이지)
페이지 인쇄Once the reporter equipment connects properly to AEQMaster_IP, you can create for
convenience new entries in the call book: Menu
ADVANCED
2. Contacts , with
the name and URI of the remote unit, the same way it was done for Phoenix Master in
the previous chapter, and then easily make calls to them.
You can of course also send the calls without having previously created a Call Book
entry from the main screen, by pressing Menu to go to the Wizard. Select the Call to
line, press Select and "URI" is selected. Then type the desired destination URI in the
line below (select "Enter URI", then press OK and type the URI in). For this
communications mode based on a SIP server, you only need to introduce the name of
the unit (for example, "Phoenix_123").
The call indications (optical and also acoustical, if enabled) will be activated at the
destination codec, that will either wait for the user to answer the call or automatically
off-hook (if this mode is enabled), and then establish the connection. The LED next to
TX PROG should become green lit and audio should be heard through the
headphones.
The three first screen lines should be:
Connected
<equipment name>@sip.aeq.es
<coding scheme>
For more information and other configuration options, please read the User Manual and
Application Notes corresponding to other scenarios. If you still have doubts, please
don't hesitate to contact one of our assistance services:
7
APLICACIONES ELECTRONICAS QUASAR S.A.
www.aeq.eu
TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web: