Clam 108272 매뉴얼 - 페이지 4
{카테고리_이름} Clam 108272에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clam 108272 5 페이지. Large side rail kit
페이지 인쇄
STEP 3 -
ATTACHING RAIL SYSTEM
A) REMOVE THE EXISTING SCREWS, WASHERS AND NUTS FROM TOP SIDES OF TRAILER.
B) PLACE THE LOOSELY ASSEMBLIED RAIL SYSTEM IN PLACE AND LOOSELY
ASSEMBLY SIDE RAILS TO TRAILER USING 1-SCREWS (102009) 1-WASHERS (102035)
AND 1-NUTS (101899) CENTERED PER EACH SIDE IN SAME LOCATIONS AS
PREVIOUSLY REMOVED FASTENERS.
C) CLEARLY MARK THE REMAINING HOLES LOCATIONS (2- PER EACH SIDE RAIL) ONTO
THE TRAILER USING A MARKER OR SOME SHARP PUNCH TOOL.
D) REMOVE THE RAIL SYSTEM FROM TRAILER.
DRILL 3/8 DIAMETER HOLES THRU THE TRAILER AT MARKED LOCATIONS
E)
PLACE RAIL ASSEMBLY BACK ON TRAILER AND FASTEN TO TRAILER USING 3-SCREWS
F)
(102009), 3-WASHER (102035) AND 3-NUTS (101899) PER EACH SIDE.
LOOSELY ASSEMBLY ALL COMPONENTS IN THIS STEP.
STEP-3 (C)
MARK HERE FOR DRILLING
LOCATIONS
.
STEP-3 (C)
MARK HERE FOR DRILLING
LOCATIONS
STEP-3 (A-B)
REMOVE EXISTING FASTNERS
AND REPLACE AS SHOWN