FIREPITS Arcturus 사용 설명서 - 페이지 6

{카테고리_이름} FIREPITS Arcturus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FIREPITS Arcturus 12 페이지.

Assembly

Attach the Gas Hose

With the unit upside-down, attach the gas hose to the gas inlet connector. Secure with

the hose clip supplied.

New hose can be quite stiff and hard to push onto the inlet

pipe, so soften the end of the hose by running it under a hot tap for a few seconds. Try

not to get water inside the hose.

Turn over

Now turn the whole assembly up the right way, To ensure you do not damage the unit,

this might be a two person job.

Add Lava Rocks

This should be carried out, outside.

The final part is to cover the burner with lava rock. DO NOT simply tip the bags of lava

rock onto the Burner, as the bags usually contain some fine dust which could clog the

burner jets. (and make a mess of your patio) It's best to empty the bags into a suitable

container and then place the rocks by hand around the burner. Make sure the cage

around the pilot light is kept clear to allow air to reach.

Congratulations, your Gas Firepit Patio Table is now assembled and ready for use.