Whirlpool WED97HEXW 사용자 설명서 - 페이지 19

{카테고리_이름} Whirlpool WED97HEXW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WED97HEXW 24 페이지. Electronic dryer
Whirlpool WED97HEXW에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 및 관리 매뉴얼 (36 페이지)

페이지 인쇄

DOOR REvERSAL (OPTIONAL)

The following instructions are for models with a

round-shaped door.

ImPoRTAnT: For models with a square shaped door, an

additional kit is needed. Please contact your retailer, or see the

For Assistance or Service page in your Use and Care Guide.

Tools needed:

Min. 8" long Torx

T25

screwdriver

Remove door from dryer

ImPoRTAnT: If the protective film has not yet been

removed from the dryer, peel the film from the dryer

door before proceeding.

Using a Torx

T25 screwdriver, remove the 4 screws securing

the door hinge to the dryer and lift up and out to remove the

door. Place the door on a soft towel or other non-scratch

surface. Reinstall the 4 screws in the holes.

† ® TORX is a registered trademark of Saturn Fasteners, Inc.

#2 Phillips screwdriver

move the door strike

Using a Torx

T25 screwdriver, remove the 2 screws securing

®†

the door strike to the door frame of the dryer. Rotate the

strike 180° and attach to the opposite side of dryer door

frame, as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.