Whirlpool 3LWED4900YW 매뉴얼 - 페이지 25

{카테고리_이름} Whirlpool 3LWED4900YW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 3LWED4900YW 30 페이지.

Select the desired cycle

Appearance may vary

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

AUTOMATIC DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to the appropriate Automatic Dry

cycle.

Selecting an Automatic Dry cyle automatically adjusts the

dryness level at which the dryer will shut off. Once a dryness

level is set, it cannot be changed without stopping the cycle.

AUTOMATIC DRY cycles give the best drying in the shortest

time. Drying time varies based on fabric type, load size, and

dryness setting.

NOTE: ENERGY PREFERRED is used for a starting point for

AUTODRY cycles. Choose ENERGY PREFERRED for optimal

energy savings.

Set cycle settings and options

(on some models)

Select cycle settings and options by turning the knob to the

desired position.

Select End of Cycle Signal

(if desired)

Turn the END OF CYCLE SIGNAL knob to select the desired

setting (On or Off). The End of Cycle Signal produces an

audible sound when the drying cycle is nished. Promptly

removing clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Shield setting is selected and

the End of Cycle Signal is on, the tone will sound every

5 minutes until the clothes are removed, or the Wrinkle

Shield setting ends.

Press PUSH to START to

begin cycle

Push and hold the PUSH to START knob to begin the cycle.

Promptly remove garments after cycle has completed to

reduce wrinkling. Use the Wrinkle Shield feature to avoid

wrinkling when you are unable to remove a load from the

dryer as soon as it stops.