Whirlpool 4GWED5500 사용 및 관리 매뉴얼 - 페이지 6

{카테고리_이름} Whirlpool 4GWED5500에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4GWED5500 48 페이지.

CYCLE GUIDE — AUTOMATIC CYCLES

Settings shown in bold are default settings for that cycle.

AUTOMATIC DRY – Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Depending on model, temperature may be selected on cycle knob or be a separate control.

Items to dry:

Jeans, heavy work

clothes, towels

Work clothes, medium

weight fabrics, sheets

Casual shirts, pants,

lightweight items,

synthetics, delicates,

athletic wear

NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you

like, select Less Dry next time you dry a similar load.

CYCLE GUIDE — TIMED DRY

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

TIMED DRY – Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on the cycle

knob or a separate control.

Items to dry:

Any load

Rubber, plastic, heat

sensitive fabrics

COOL DOWN – This step is added to any cycle that uses heat. The load is cooled slowly to reduce wrinkling and make it easier to

handle.

Setting the drying temperature

If your dryer has multiple heat settings:

A High heat setting may be used for drying heavyweight items

such as towels and work clothes.

A Low to Medium heat setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.

Cycle:

Drying

Temperature:

More Dry

Normal Dry

Medium

Less Dry

Cycle:

Drying

Temperature:

Timed Dry

Available

Options:

High

Wrinkle Shield

Cycle Signal

Temp

Low

Available

Options:

Any

Wrinkle Shield

Cycle Signal

Temp

Air Dry

Wrinkle Shield

Cycle Signal

Use an Air Dry (no heat) setting for foam, rubber, plastic,

or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures

for various loads, refer to the care label directions.

Cycle Details:

Gives the best drying in the shortest

time. Drying time varies based on

fabric type, load size, and dryness

setting.

Select a drying temperature based

on the fabrics in your load. If you are

unsure of the temperature to select for

a load, select the lower setting rather

than the higher setting.

Cycle Details:

Dries items to a damp level for items

that do not require an entire drying

cycle.

Select a drying temperature based

on the fabrics in your load. If you are

unsure of the temperature to select for

a load, select the lower setting rather

than the higher setting.

Use an Air Dry (no heat) setting for

foam, rubber, plastic, or heat-sensitive

fabrics.