Whirlpool 4GWED5500YW2 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Whirlpool 4GWED5500YW2에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4GWED5500YW2 48 페이지.

페이지 인쇄

CONTROL PANEL & FEATURES

POWER/STANDBY BUTTON

Press to turn the dryer on and off.

DRYER CYCLE KNOB

Use your Dryer Cycle knob to select available cycles on

your dryer. Turn the knob to select a cycle for your laundry

load. See "Cycle Guide" for detailed descriptions of cycles.

Timed Dry

Will run the dryer for the specified time on the control.

On models with a selectable temperature knob, you may

choose a setting based on the fabrics in your load. Drying

time and temperature will depend on your dryer model.

Automatic Cycles with ACCUDRY Control

Senses moisture in the load and air temperature and

shuts off when the load reaches the selected dryness

level. Gives the best drying in the shortest time. Drying

time will vary based on fabric type, load size, and dryness

setting.

START/PAUSE BUTTON

Press to start a cycle, or press once while a cycle is in

process to pause it.

OPTIONS AND SETTINGS

Temp

Select a drying temperature based on the fabrics in your

load. If you are unsure of the temperature to select for

a load, select the lower setting rather than the higher

setting.

NOTE: The Air Dry Temp Feature is not available on the

Automatic Cycles.

Wrinkle Shield Feature

When you are unable to remove a load of clothes

from the dryer as soon as it stops, wrinkles can form.

The WRINKLE SHIELD feature periodically tumbles,

rearranges, and fluffs the load to help keep wrinkles

from forming.

Press the WRINKLE SHIELD button to turn ON

or OFF at any time before the cycle has ended.

Not all features and options are available on all models.

Appearance may vary.

Cycle Signal

The Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes

at the end of the cycle reduces wrinkling.

Press CYCLE SIGNAL to turn on.

NOTE: When the Wrinkle Shield setting is selected

and the Cycle Signal is on, the tone will sound every

20 minutes until the clothes are removed, or the Wrinkle

Shield setting ends.

CYCLE STATUS LIGHTS

Lights indicate the progress of the drying cycles.

Wet

The load is still wet and/or the cycle just started.

Damp

This indicator shows that the load is partially dried and

items that you may wish to hang up or iron while still

damp may removed.

Cool Down

The dryer has finished drying with heat, and is now

tumbling the load without heat to cool it down and

reduce wrinkling.

Done

This will indicate that the selected cycle has ended and

the load may be removed from the dryer. If the Wrinkle

Shield option has been selected, the dryer may continue

to tumble the load, even if the Done indicator is lit.

Wrinkle Shiel

This indicator will light if the Wrinkle Shield option has

been selected and is running. The dryer will continue to

tumble the load for up to 90 minutes after the cycle has

ended.