Whirlpool 4KNED4600 사용 및 관리 매뉴얼 - 페이지 4

{카테고리_이름} Whirlpool 4KNED4600에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 4KNED4600 36 페이지.

페이지 인쇄

SPECIFICATIONS

These units are sold in multiple

regions with different

requirements for measuring capacity. Below are a few

of the valid forms of measure posted on this product:

Dry Linen Capacity:

A weight measure that reflects a

maximum load size that can be loaded into the dryer.

Test Capacity:

A capacity measure that represents the

capacity at which safety testing was completed.

Dry Linen Capacity

10,5 kg (23 Ib)

Test Capacity

9,97 kg (22 Ib)

]

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent,

Failure to follow

these instructions can result in death

or fire,

fGood

air flow

Along with heat, dryers require good air flow to efficiently

dry laundry. Proper venting will reduce your drying times and

improve your energy savings. See Installation Instructions.

The venting system attached to the dryer plays a big role in

good air flow.

Service calls caused by improper venting are not covered by

the warranty and will be paid by the customer, regardless of

who installed the dryer.

Maintain

good air flow by:

[]

Cleaning your lint screen before each load.

Replace plastic or foil vent material with 102 mm (4")

diameter heavy, rigid vent material.

lo2 mm

(4")

[] Use the shortest length of vent possible.

[]

Use no more than four 90 ° elbows in a vent system;

each bend and curve reduces air flow.

[]

Bet

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system at

least every 2 years. When cleaning is complete, be sure

to follow the Installation Instructions supplied with your

dryer for final product check.

Clear away items from the front the dryer.

Use Automatic

Dry Cycles

for Better

Fabric

Care and Energy Savings

cycles, drying air temperature

or moisture level are sensed in the load. This sensing occurs throughout

the drying cycle and the

dryer shuts off when the load reaches the selected dryness.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying._

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.