Whirlpool 8528095 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Whirlpool 8528095에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 8528095 28 페이지. Electric dryer

Level and Exhaust the Dryer

Dryer must be level to reduce noise and assure proper

performance.

Slide dryer onto cardboard or hardboard before moving across

floor to prevent floor damage.

1. Move dryer close to its permanent location. Leave enough

room to connect exhaust vent. Remove cardboard or

hardboard from under dryer.

2. Check levelness of dryer by placing a level on top of dryer,

first side to side, then front to back. If dryer is not level,

adjust dryer legs up or down.

3. If legs are not long enough to level dryer, order Extended

Dryer Feet Kit, Part No. 279810 (sold two legs per kit), from

your dealer.

4. Connect exhaust vent to exhaust outlet in dryer. The exhaust

vent must fit over the dryer exhaust outlet and inside the

exhaust hood vent.

Use 100 mm (4") vent clamps to seal all joints and to secure

exhaust vent to dryer exhaust outlet.

10.2 cm (4")

clamp

5. Move dryer into final position.

10.2 cm (4")

clamp