Whirlpool AGD4475TQ1 사용자 지침 - 페이지 7
{카테고리_이름} Whirlpool AGD4475TQ1에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AGD4475TQ1 24 페이지.
페이지 인쇄
Cleaning the Dryer Location
Keep dryer area clear and free from items that would block the
air flow for proper dryer operation. This includes clearing piles of
laundry in front of the dryer.
Cleaning the Lint Screen
Clean lint screen before each load. A screen blocked by lint can
increase drying time.
IMPORTANT:
Do not run the dryer with the lint screen loose, damaged,
■
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
If lint falls off the screen into the dryer during removal, check
■
the exhaust hood and remove the lint. The exhaust hood is
located where the dryer air exits your home.
DRYER CARE
Every Load Cleaning
Style 1:
1.
The lint screen is located on top of the dryer. Pull the lint
screen toward you. Roll lint off the screen with your fingers.
Do not rinse or wash screen to remove lint. Wet lint is hard to
remove.
2.
Push the lint screen firmly back into place.
Style 2:
1.
The lint screen is located in the door of the dryer. Pull the lint
screen straight up. Roll lint off the screen with your fingers.
Do not rinse or wash screen to remove lint. Wet lint is hard to
remove.
2.
Push the lint screen firmly back into place.
7