Whirlpool AWZ220 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Whirlpool AWZ220에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AWZ220 5 페이지.
Whirlpool AWZ220에 대해서도 마찬가지입니다: 사용 설명서 지침 (6 페이지)

18190-gb.fm5 Page 7 Monday, November 12, 2001 10:41 AM

DESCRIPTION OF THE DRYER

1. Work top

2. Contact pin

3. Door

To open the door: pull the handle

To close the door: push gently until closed.

4. Filter

On delivery from the factory, the outlet vent hose, together with an

adaptor, is located in the drum.

Note: If the vent hose is not supplied, the AMH 577 kit, available from

your dealer, should be used.

Installing the vent hose

1. Place a towel or the packing material on the right-hand side next

to the dryer.

2. Place the dryer on its right-hand side (seen from the front) on the

towel or the packing material.

3. Push the adapter into the hose (see illustration). Attach the

adapter with the vent hose to the connection in the dryer base

and lock it into place.

Venting outside

Without kinking it, lead the vent hose outside (inside diameter

10 cm, maximum length with two bends 3 m).

Ensure that the vent hose does not sag when stacking the dryer on a

washing machine. It should only be placed horizontally or upwards.

Do not connect to ventilation systems protected by fly nets. These can

become clogged and cause malfunctioning of the dryer.

Do not connect the vent hose to a chimney system.

Do not connect the vent hose to the heating system. Only connect

the hose to ventilation systems insulated against humidity.

Dryer operation without vent hose

Only use the dryer in a large, well-ventilated room.

Keep the room free of dust.

A minimum distance of 10 cm between rear of appliance and the wall

must be observed.