Whirlpool AWZ9CDS/PRO 사용, 관리 및 설치 매뉴얼 - 페이지 27

{카테고리_이름} Whirlpool AWZ9CDS/PRO에 대한 사용, 관리 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AWZ9CDS/PRO 32 페이지.

Below is a summary of possible failure causes and

solutions .

If the problem persists after having followed the

instructions as indicated below, press and hold

On/Off for at least three seconds . If afterwards the

failure indication still appears, switch off and unplug

the dryer and contact our After-Sales Service .

Display message

Possible Cause

F01 to F04

Failure of a component

F05 to F09

Failure of a component

F10 to F24

Failure of a component

TRANSPORT AND HANDLING

WARNING

Unplug the dryer .

Make sure that door and water tank are

properly closed .

Solution

Press and hold On/Off for at least 3 seconds .

Switch off and unplug the dryer . Immediately

open the door and take out the laundry, so that

the heat can dissipate.

Make sure that the ambient temperature ranges

between 5°C and 35°C . Wait for about an hour .

Plug in the dryer, load the laundry and start the

programme again .

If the failure persists, call the After-Sales Service .

Switch off and unplug the dryer . Wait for about half

an hour . Plug in the dryer and start the programme

again .

If the failure persists, call the After-Sales Service .

Never lift the dryer by

holding it at the worktop.

system, fix the drain hose on the rear of the dryer

again (see Installation Guide) .

If the drain hose is connected to your sewage