Whirlpool AZA-HP 9781 빠른 참조 매뉴얼 - 페이지 4

{카테고리_이름} Whirlpool AZA-HP 9781에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZA-HP 9781 6 페이지.

In case of a malfunction of the dryer, one the following failure codes could be

displayed:

FAILURE CODE

F01 – F04

F05

F06

F07

F10 – F24

Start LED blinks 2

times per second

when pressed

Bottom filter LED

is blinking, Start

LED blinks 2 times

per second when

pressed

FAILURE CODES

You can check yourself before calling the After-Sales

Please call the After-Sales Service.

Turn the dryer OFF and unplug it. Make sure that the room

temperature is between 5°C and 35°C. Wait for 1 hour. Plug the

dryer back in and restart it. If the failure reoccurs, please call the

After-Sales Service.

Turn the dryer OFF and unplug it. Make sure that the room

temperature is between 5°C and 35°C. Wait for 1 hour. Plug the

dryer back in and restart it. If the failure reoccurs, please call the

After-Sales Service.

Turn the dryer OFF and unplug it. Make sure that the room

temperature is between 5°C and 35°C. Unload approximately one

half of the laundry from the dryer. Wait for 1 hour. Plug the dryer

back in and restart it. If the failure reoccurs, please call the

After-Sales Service.

Turn the dryer OFF and unplug it. Wait for 30 minutes. Plug the

dryer back in and restart it. If the failure reoccurs, please call the

After-Sales Service.

Make sure that the door is correctly closed and the bottom filter

correctly positioned.

If the failure reoccurs, please call the After-Sales Service.

Make sure that the bottom filter is correctly positioned.

If the failure reoccurs, please call the After-Sales Service.

Service.