Whirlpool Cabrio WED5600X 사용 및 관리 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool Cabrio WED5600X에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool Cabrio WED5600X 28 페이지. 27" electric dryer
Whirlpool Cabrio WED5600X에 대해서도 마찬가지입니다: 치수 매뉴얼 (2 페이지), 치수 매뉴얼 (1 페이지)

페이지 인쇄

Select the desired cycle

Select the desired cycle for your load. See the "Cycle Guide"

or the display for more information about each cycle.

NOTE: Not all options and settings are available with all cycles.

Set cycle settings

The default cycle settings will be shown. For some cycles,

you may select alternate settings by pressing the button for

that setting. Time adjusts for Manual Cycles only.

NOTE: Not all options and settings are available with all cycles.

Temp (for use with Manual Cycles only)

Press the TEMP button to change the drying temperature

from the default setting. Press MORE TIME or LESS TIME

and the time will change by 1-minute intervals. Press and

hold MORE TIME or LESS TIME and the time will change

by 5-minute intervals.

Dryness Level (for use with Automatic Cycles only)

You can select a different dryness level, depending on your

load, by pressing the button for More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the

dryness level at which the dryer will shut off. Once a dryness

level is set, it cannot be changed without stopping the cycle.

Automatic cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and dryness

setting.

NOTE: More Dry removes more load moisture. Normal Dry

is used for a starting point for automatic drying. Less Dry

removes less moisture and is used for loads you may want

to put on a hanger to complete drying.

Wrinkle Shield™ feature

Get up to 60/150 minutes of heat-free, periodic tumbling at

the end of a cycle. Press the WRINKLE SHIELD™ button to

turn ON or OFF at any time before the cycle has ended.

The WRINKLE SHIELD™ feature is preset to "OFF." If

selected for other cycles, the WRINKLE SHIELD™ feature

setting will remain "ON" the next time that cycle is selected.

Select cycle options (if desired)

Add additional options by pressing the button.

NOTE: Not all options and settings are available with all

cycles.

Press START/PAUSE to begin cycle

Press the START/PAUSE button to begin the cycle.

Remove garments promptly

after cycle is finished

Promptly remove garments after cycle has completed to

reduce wrinkling. If you are unable to remove the load

promptly, press the Wrinkle Shield button to turn ON or OFF

at any time before the cycle has ended.

Additional features

Select Drum Light to turn on the light inside the dryer drum.

When pressed during a cycle or not running, the Drum Light

turns on and will remain on until DRUM LIGHT is pressed

again, the door is opened and closed, or the door is left open

for 30 minutes.

(on some models)