Whirlpool cabrio WED6400S 사용 및 관리 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool cabrio WED6400S에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool cabrio WED6400S 32 페이지. Whirlpool electric dryer dimensions
Whirlpool cabrio WED6400S에 대해서도 마찬가지입니다: 치수 및 설치 (1 페이지), 치수 및 설치 정보 (1 페이지)

페이지 인쇄

Drum Light Option

On some models, select Drum Light to turn on the light inside the

dryer drum. During a cycle, if Drum Light is selected, the drum

light turns on and will remain on until DRUM LIGHT is pressed

again, the door is opened and closed, or the door is left open for

5 minutes.

When the dryer is not running, the drum light will turn on when

DRUM LIGHT is pressed or the dryer door is opened, and it will

remain on until the dryer door has been open for 5 minutes, the

dryer door is closed or DRUM LIGHT is pressed again.

Press DRUM LIGHT at any time to turn the drum light ON or OFF.

WRINKLE SHIELD™ Setting Option

The WRINKLE SHIELD™ setting helps keep wrinkles from forming

when you cannot unload the dryer promptly at the end of a cycle.

During this option, the dryer stops tumbling and then tumbles

again for a brief period.

■

Press the WRINKLE SHIELD™ setting to get up to

120 minutes of heat-free, periodic tumbling at the end of a

cycle.

■

Stop the WRINKLE SHIELD™ setting at any time by pressing

WRINKLE SHIELD™ setting or opening the dryer door.

■

For the Perm Press/Casual Cycle, the WRINKLE SHIELD™

setting is preset to ON. The other Automatic Cycles will retain

the WRINKLE SHIELD™ setting. For example, if you select the

WRINKLE SHIELD™ setting in the Normal cycle, the

WRINKLE SHIELD™ setting will be on the next time you

select the Normal cycle.

NOTE: If you do not select the WRINKLE SHIELD™ setting, the

dryer stops after cool down.

Damp Dry Signal Option

Select the Damp Dry Signal to alert you that your clothes are

approximately 80% dry. This is useful when you want to remove

lightweight items in a mixed load to avoid overdrying or remove

partially dry items that may need ironing.

The Damp Dry Signal is useful when drying bedsheets/linens in a

mixed load. When the signal goes off, open the door to stop the

dryer, rearrange the load inside the dryer, close the door and

restart the dryer to finish the drying cycle. Rearranging the load

will aid in the drying process.

NOTE: The Damp Dry Signal is available only with the Automatic

Cycles.

End of Cycle Signal Option

The End of Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes at the end of

the cycle reduces wrinkling.

Press END OF CYCLE SIGNAL until the desired volume (Loud,

Soft, or Off) is selected.

NOTE: When the WRINKLE SHIELD™ setting is selected and the

End of Cycle Signal is on, a tone sounds every 5 minutes until the

clothes are removed, or the WRINKLE SHIELD™ setting ends.

Status Lights

Follow the progress of your dryer with the drying Status indicator

lights.

Sensing

■

In an Automatic Cycle, the Sensing light illuminates until a wet

item is detected.

■

In the Timed Cycle, the Sensing light illuminates at the

beginning of a cycle and turns off 5 minutes into the cycle.

Wet

The Wet light illuminates at the beginning of an Automatic Cycle if

a wet item is detected.

■

In an Automatic Cycle, if a wet item is not detected after

approximately 5 minutes, the dryer goes directly into Cool

Down and the Cool Down and the WRINKLE SHIELD™

setting indicators illuminate, if selected.

■

In a Timed Cycle, wet items are not detected. The dryer will

continue to run for the length of time selected, and the Wet

light will illuminate. The damp light will not illuminate.

■

In the Enhanced Touch Up or the Quick Refresh Steam Cycles

(on some models), the Wet light comes on after the water has

been sprayed into the drum, 5-6 minutes into the cycle. The

Wet light illuminates until the dryer goes into Cool Down with

1 minute of time remaining.

Damp

The Damp light illuminates in an Automatic Cycle when the

laundry is approximately 80% dry. Damp Dry Signal beeps, if

selected. See "Options."

Cool Down

The Cool Down light illuminates during the cool down part of the

cycle. Laundry cools for ease in handling.

Done

The Done light illuminates when the drying cycle is finished. This

indicator stays on during the WRINKLE SHIELD™ setting.

WRINKLE SHIELD™ Setting

The WRINKLE SHIELD™ setting light illuminates when this option

is selected. This indicator stays on during the WRINKLE

SHIELD™ setting.