Whirlpool Cabrio,- WED5550X 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Whirlpool Cabrio,- WED5550X에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool Cabrio,- WED5550X 28 페이지. 27" electric dryer
Whirlpool Cabrio,- WED5550X에 대해서도 마찬가지입니다: 치수 매뉴얼 (2 페이지), 치수 매뉴얼 (1 페이지)

페이지 인쇄

CONTROL PANEL & FEATURES

POWER BUTTON

Press to turn the dryer on and off.

DRYER CYCLE Knob

Use your Dryer Cycle Knob to select available cycles on

your dryer. Turn the knob to select a cycle for your laundry

load. See "Cycle Guide" for detailed descriptions of cycles.

Timed Dry

Will run the dryer for the specified time on the control.

On models with a selectable temperature knob, you may

choose a setting based on the fabrics in your load. Drying

time and temperature will depend on your dryer model.

Automatic Cycles with ACCUDRY™ Control

Senses moisture in the load and air temperature and shuts

off when the load reaches the selected dryness level. Gives

the best drying in the shortest time. Drying time will vary

based on fabric type, load size, and dryness setting.

START/PAUSE BUTTON

Press to start a cycle, or press once while a cycle is in

process to pause it.

OPTIONS AND SETTINGS

Temp

Select a drying temperature based on the fabrics in your

load. If you are unsure of the temperature to select for a

load, select the lower setting rather than the higher setting.

NOTE: The Air Dry Temp Feature is not available on the

Automatic Cycles.

Not all features and options are available on all models.

Appearance may vary.

Wrinkle Shield™ Feature

When you are unable to remove a load of clothes from the

dryer as soon as it stops, wrinkles can form. The WRINKLE

SHIELD™ feature periodically tumbles, rearranges, and

fluffs the load to help keep wrinkles from forming.

Get up to 60 or 150 minutes for models with two

choices, 90 minutes for models with only one choice of

heat-free, periodic tumbling at the end of a cycle. Press

the WRINKLE SHIELD™ button to turn ON or OFF at any

time before the cycle has ended.

Cycle Signal

The Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes at the

end of the cycle reduces wrinkling.

Press CYCLE SIGNAL until the desired volume (Loud, Soft,

or off) is selected.

NOTE: When the Wrinkle Shield™ setting is selected

and the Cycle Signal is on, the tone will sound every

20 minutes until the clothes are removed, or the Wrinkle

Shield™ setting ends.

DAMP DRY SIGNAL (for use with Automatic

Cycles only)

Selecting the Damp Dry Signal will alert you when your

clothes are approximately 80% dry. This is useful when

you want to remove lightweight items in a mixed load to

avoid overdrying or remove partially dry items that may

need ironing.

CYCLE STATUS LIGHTS

Lights indicate the progress of the drying cycles.