Whirlpool CGM2793BQ 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool CGM2793BQ에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool CGM2793BQ 48 페이지. Commercial dryer gas or electric
Whirlpool CGM2793BQ에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (48 페이지)

페이지 인쇄

GAS DRYER INSTALLATION REQUIREMENTS

Electrical Requirements

IMPORTANT: The dryer must be electrically grounded in

accordance with local codes and ordinances or, in the absence

of local codes, with the National Electrical Code, ANSI/NFPA

70, latest edition, or Canadian Electrical Code, CSA C22.1.

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrical installer determine

that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

Do not ground to a gas pipe.

■

Do not have a fuse in the neutral or ground circuit.

■

A 120 volt, 60 Hz, AC only, 15- or 20-amp, fused electrical

■

circuit is required. A time-delay fuse or circuit breaker is also

recommended. It is recommended that a separate circuit

serving only this dryer be provided.

This dryer is equipped with a power supply cord having a

■

3-prong grounding plug.

To minimize the possibility of shock, the cord must be

■

plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances.

If a mating outlet is not available, it is the personal

responsibility and obligation of the customer to have the

properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is

■

recommended that a qualified electrician determine that the

ground path is adequate.

Check with a qualified electrician if you are not sure the

■

dryer is properly grounded.

Gas Dryer Grounding